Cost-Effective Flexible Pressure Transducer For Plastic Extruder Machine

Plastik Ekstruder Makinesi İçin Maliyet Etkin Esnek Basınç Dönüştürücü

Cost-Effective Flexible Pressure Transducer For Plastic Extruder Machine

Brand: Zhyqs Sensor

PT124G-111/ 111T/121/121T Series melt pressure transducer is economic type, designed with rigid stem construction. And the model PT124G-111T/121T comes with thermocouple, it can measure the pressure and temperature at one point. This product built in amplifier circuit board and 80% shunt calibration, zero and span adjustable, the output signal can input PLC directly. And it can match the N series pressure instrument from ZHYQ, also can match the pressure instrument or controller of other brand.

Model: PT124G-111/111T/121/121T

Request a Quote

Explanation

Features:

Widely pressure range;

Stainless steel Seal;

Simple Installation;

80% inner calibration;

Excellent stability and repeatability;

Application:

It can be widely used in various plastic extrusion lines for pressure measuring and control, such as melt-blown, non-woven, chemical fiber manufacturing equipment, plastic rubber machine, polyester equipment and petrochemical.

Technical Information

Model	PT124G-111/111T/121/121T
Pressure range	0-3.5MPa…0-150MPa (0-500psi…0-20000psi)
Over Pressure	1.5 X FSO
Combined Error	± 0.5% FSO (Including Linearity, Repeatability & Hysteresis)
Output	2mV/V
Input Voltage	10VDC
Repeatability	+/- 0.2%FSO
Bridge Resistance Input	345 Ohms minimum
Bridge Resistance Output	350 Ohms +/- 10%
Internal Shunt Calibration (R-Cal)	80% FSO +/- 1%
Insulation Resistance	200 megohms @ 100 Vdc
Max Diaphragm Temperature	300 ℃
Mounting Torque	500 inch/lbs. max.
Standard Wetted Parts	Diaphragm coated 15-5 PH SST
Thermocouple type	J, K, E, PT100 (PT124B-111T, PT124B-121T)
Electrical connector	5PIN
Process connector	M14×1.5, 1/2-20UNF, M18×1.5 Optional