Restricted Area Melt Pressure Transducer

Restricted Area Melt Pressure Transducer

Brand: Zhyqs Sensor

PT124G-128 Series capillary flush diaphragm melt pressure transmitter is ideal for space restricted areas applications required, where mounting space is limited. It also has a free-spinning jam nut that simplifies installation. It comes equipped with six or eight pin bendix connector. This series product is widely used in the domestic and abroad, and it can be interchangeable with the similar world standard products.

Model: PT124G-128

Request a Quote

Explanation

Feature:

High-standard quality;
Accuracy better than ±0.5%;
Stainless steel wetted parts;
Internal 80% Shunt Calibration;
Good stability and repeatability;
Exposed, bendable capillary;

Application:

It can be widely used in various plastic extrusion lines for pressure measuring and control, such as chemical fiber manufacturing equipment, plastic rubber machine, polyester equipment and petrochemical.

Technical Information

Model	PT124G-128
Pressure range	0-3.5MPa…0-150MPa (0-500psi…0-20000psi)
Over Pressure	1.5 X FSO
Combined Error	±0.5% FSO (Including Linearity,Repeatability&Hysteresis)
Output	3.33mV/V, 2mV/V
Input Voltage	10VDC
Repeatability	+/- 0.2%FSO
Bridge Resistance Input	345 Ohms minimum
Bridge Resistance Output	350 Ohms +/- 10%
Internal Shunt Calibration (R-Cal)	80% FSO +/- 1%
Insulation Resistance	200 megohms @ 100 Vdc
Max Diaphragm Temperature	350 ℃
Mounting Torque	500 inch/lbs. max.
Standard Wetted Parts	Diaphragm coated 15-5 PH SST
Electrical connector	5PIN, 6PIN
Process connector	1/2 ″ -20UNF, M14×1.5, M18×1.5 Optional